Timer manual and instructions

• Program the same feed times or different times for every day of the week
• Each day can have 0 to 17 feeds ie 17 on/off settings
• Manual override 
• Lithium battery power reserve for clock
• Minimum feed delivery time is 1 minute (can be less with addition of delay timer)

Download printable copy of timer specification and instructions (pdf, 631 kb)

User instructions

 To set the time:
1.  Press and hold down the clock button,  while tapping the D+ button to set the day 
2.  Release the clock button
3.  Press and hold down the clock button again and tap H+ to set the hour and then M+ to set the minutes 

To program the same feeding times every day of the week:
1.  Press the P for Program button, display shows (1  ON).  
2.  Press  H+ to set the hour and M+ to set the minutes that the feeder will start eg 8:10 
3. Press P again,  display shows (1  OFF)  
4. Press H+ and M+ to set when the feeder will turn off eg 8:15 
5.  Repeat steps 1 to 4 to set up to 17 ON/OFF feeds per day 
6.  After setting the number of ON/OFF programs you want, press the clock button to end programming
Note:  Since all days of the week are displayed when in programming mode, there is no need to use the D+ day key

To program different feeding times on different days of the week:
1.  Press the P for Program button, display shows (1 ON)  
2. Press D+ to specify the day or days that program 1 will run on eg Sat Sun
3.  Press  H+ to set the hour and M+ to set the minutes that the feeder will start
4. Press P again,  display shows (1 OFF) 
5.  Press D+ to specify the day or days that program 1 will turn feeder off eg Sat Sun
6.  Press  H+ to set the hour and M+ to set the minutes that the feeder will stop
7.  Repeat steps 1 to 6 to set all required ON/OFF feeds on specified days
8. Press the clock button to end programming
​

Technical specifications and instruction sheet